No, Sau’Sea does not, however, if you contact us at 609 859 8500 we can direct you to where you can purchase.
Unfortunately, we do not provide color samples in quart or swatches. A color chart is located on our website under the “TOOL” tab.
Yes, you do need to perform a surface prep before re-painting rubber coating over prior painted pool surface once painted with rubber pool coating.
Under the “TOOLS” section has our brochure and color chart and “SWIMMING POOL COATINGS” section of our website has PDFs of our can labels.
There are a few options to determine the type of coating on a pool surface. One option is to purchase our Test Kit #1 and do your own testing. Our technical personnel can walk you through the steps if you call 609 859 8500. Second option is to send us samples of paint chips. We recommend sending multiple quarter size pieces to 1855 Route 206 Southampton NJ 08088 NOT the PO Box. The paint chip analysis form is located on the top right of our website. The form has detailed instructions. Service is free of charge.
The French Gray color is more of a brown hue. The Slate Gray is a darker gray. We have in the past made a custom color Nucci Gray which is a lighter gray.
French Gray
- The thinning ratio for one 5 Gallon of UHG Rubber coating is 20% of a 1 Gallon can of Rubber Diluent.
- Rubber Diluents are sold 6-1G to a case.
Yes, you can paint a Fiberglass pool with Epoxy coating. If the Fiberglass pool surface was prior painted FIRST determine the TYPE of coating that was last used. Sau’Sea recommends continued use of the same type of coating that is currently on the pool surface. If coating TYPE will be changed specific removal and prep instructions MUST be followed.
We do not recommend our Sau’Sea Epoxy coating be applied on pool coping. Our Epoxy coating once dried provides a glass like finish. If Epoxy is used on deck coping the surface becomes slippery which can become a tripping hazard.
Sau’Sea recommends using white playground sand by sprinkling onto the wet painted steps then dusting off excess sand when steps are dry or Sau’Sea sells a Chestnut Brown Abrasive (1 gallon & quart size).
No, there is no separate SKU or product code for the Epoxy Part B.
Yes, non-hazmat 1 Gallon or less Sau’Sea can FEDEX ship.
Yes, Sau’Sea can manufacture Custom Colors; however, a 20 Gallon minimum order is required in order for a Custom Color to be made.
The Eco Choice Ultra High Gloss Natural Rubber Coating if stored in its original pail or can, undamaged pail or can, lid closed securely and undamaged lid can last for 10 years.
